Scotch-Brite EX2 Deburring Wheel, X2-WL, 8S Medium, 8 in x 1 in x 3 in
Scotch-Brite EX2 Deburring Wheel, X2-WL, 8S Medium, 8 in x 1 in x 3 in
Scotch-Brite EX2 Deburring Wheel, X2-WL, 8S Medium, 8 in x 1 in x 3 in

Scotch-Brite EX2 Deburring Wheel, X2-WL, 8S Medium, 8 in x 1 in x 3 in

Regular price
/

$335.99 USD & FREE Shipping.
  • Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
  • Tough, layered, unitized construction can operate clockwise or counterclockwise directions
  • Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
  • Resists smearing for cleaner surfaces and less preparation
  • Minimizes heat build up to lessen impact on heat-sensitive materials
Overview
Scotch-Brite EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.

Our high performance combination of mineral (aggressiveness) and density (hardness) make the Scotch-Briteâ„¢ EX2 wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up. The EX2 Deburring Wheel runs cool and resists loading due to its open-web construction. We did this to reduce the risk of part discoloration and warping, while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives.

Our Scotch-Briteâ„¢ EX2 Deburring Wheel is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.

Scotch-Briteâ„¢ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

Scotch-Brite EX2 Deburring Wheel, X2-WL, 8S Medium, 8 in x 1 in x 3 in

Specifications
General Information
Brand
Scotch-Briteâ„¢
Attachment Type
Center Hole
Country Of Origin
United States
Sold As
Case
Lead Time
9 days
California Residents
Dimensions and Specifications
Center Hole Diameter (Imperial)
3 in
Center Hole Diameter (Metric)
76.2 mm
Face Width (Imperial)
1 in
Face Width (Metric)
25.4 mm
Maximum Speed
4500 rpm
Overall Diameter (Imperial)
8 in
Overall Diameter (Metric)
203.2 mm
Grit
Non Pertinent
Width
8.7 in
22.1 cm
Height
4.21 in
10.7 cm
Length
8.7 in
22.1 cm
Volume
318.91 cubic inch
5225.99 cm3
Weight
3.84 lb
1.74 kg
Other Details
Density
8
Industries
Marine
Sub Industries
Medical Instruments
Usage Information
Application
Deburring
Equipment - Machines
Manual Backstand
For Use On
Composites
Sub Applications
Blending
Equipment Machines
Manual Backstand
Material and Composition
Abrasive Material
Silicon Carbide
Grade
Medium
Product Form
Wheel
Color and Appearance
Product Color
Gray
Why would you use this tool for ?
Reviews