Standard Abrasives Metal Finishing Wheel 850225, 8 in x 4 in x 3 in 5A
MED
Standard Abrasives Metal Finishing Wheel 850225, 8 in x 4 in x 3 in 5A
MED
Standard Abrasives Metal Finishing Wheel 850225, 8 in x 4 in x 3 in 5A
MED

Standard Abrasives Metal Finishing Wheel 850225, 8 in x 4 in x 3 in 5A MED

Regular price
/

$400.99 USD & FREE Shipping.
  • Produces satin and antique finishes on a variety of metals
  • Can be dressed to fit specific part geometry
  • Rigid convolute wheel construction works well on flat surfaces and corners
  • High cut rate requires low contact pressure
  • Open web is load resistant, prolonging abrasive service life
Overview
Standard Abrasives Metal Finishing Wheel is a dense and stiff convolute wheel designed to help you achieve a final finish on a variety of metals.

Producing Fine Finishes
Whether a technical requirement or purely aesthetic, many industrial markets value a final finish on their workpieces. We engineered our Standard Abrasives™ Metal Finishing Wheel to help produce the finishes users hope to achieve. It’s a good match for stainless steel fabricators and appliance and food equipment manufacturers, because it can help with production finishing of a variety of parts. Typical workpieces may include door hardware, plumbing fixtures, aluminum extrusions, sanitary metal containers and dairy equipment.

The Benefits of Aluminum Oxide
To engineer our Standard Abrasives™ Metal Finishing Wheel, we mix aluminum oxide mineral and nonwoven nylon fibers with resin to create an open web. Often, the mineral is paired with ferrous metals and composites, as well as fiberglass and plastic. It cuts aggressively without gouging or marring the substrate, maintaining original part geometry and reducing the need for rework. Medium grade aluminum oxide imparts decorative satin and antique finishes on stainless steel, brass and aluminum.

Dense and Durable
The nonwoven nylon fibers in the open web break down while finishing, exposing new mineral for a consistent cut. Moreover, gaps between the fibers allow swarf to escape, so the web resists clogging with debris, prolonging abrasive service life. Open web on the Metal Finishing Wheel is densely and compactly wound around a fiberglass core. The dense and durable construction helps the abrasive withstand greater contact pressures and speed variations. Additionally, the wheel edge can also be dressed to match part geometry if required. Combining aluminum oxide mineral with a dense convolute wheel constructions makes for a tough durable cutting wheel that requires minimal pressure. Moreover, the wheel’s density helps it stay firm and not deflect or yield to the substrate, so it performs well on flat surfaces and edges.

Altogether, our Standard Abrasives™ Metal Finishing Wheel is a durable and long lasting finishing wheel. It has the strength and toughness required to stand up to edges and extrusions but still leaves a soft, fine finish in its wake.

Standard Abrasives Metal Finishing Wheel 850225, 8 in x 4 in x 3 in 5A MED

Specifications
General Information
Brand
Standard Abrasivesâ„¢
Attachment Type
Center Hole
Country Of Origin
United States
Sold As
Case
Lead Time
14 days
California Residents
Dimensions and Specifications
Center Hole Diameter (Imperial)
3 in
Center Hole Diameter (Metric)
76.2 mm
Face Width (Imperial)
4 in
Face Width (Metric)
101.6 mm
Overall Diameter (Imperial)
8 in
Overall Diameter (Metric)
203.2 mm
Grit
Non Pertinent
Width
8.37 in
21.27 cm
Height
4.69 in
11.91 cm
Length
8.37 in
21.27 cm
Volume
328.79 cubic inch
5387.89 cm3
Weight
4.39 lb
1.99 kg
Other Details
Density
5
Material and Composition
Abrasive Material
Aluminum Oxide
Grade
Medium
Product Form
Wheel
Resources
Brochures
Why would you use this tool for ?
Reviews