Standard Abrasives Quick Change TR A/O Unitized Wheel 882198, 821 3 in
x 1/4 in
Standard Abrasives Quick Change TR A/O Unitized Wheel 882198, 821 3 in
x 1/4 in

Standard Abrasives Quick Change TR A/O Unitized Wheel 882198, 821 3 in x 1/4 in

Regular price
/

$135.99 USD & FREE Shipping.
  • Combining a high density wheel with medium or coarse mineral results in superior edge deburring and polishing
  • Harder material and increased edge durability over 700 Series Unitized Wheels increases life for heavy-duty tasks
  • Aluminum oxide mineral is a good match for ferrous and non-ferrous metals, including aluminum
  • Open web is load resistant, contributing to longer abrasive service life
  • Easy fastening and swapping of quick change disc enhances tool efficiency and worker productivity
Overview
A high density wheel designed with extra tough edge durability, the Standard Abrasives Quick Change Aluminum Oxide 800 Series Unitized Wheel is a good match for heavy-duty edge deburring and stainless steel polishing applications on smaller areas of the workpiece.

Hard Density Wheel Removes Challenging Burrs with Precision and Imparts a Fine Polish
Our Standard Abrasivesâ„¢ Quick Change Unitized Wheel, A/O 800 Series is offered in two grades of aluminum oxide (A/O) mineral: coarse or medium. The hardness of this non-woven abrasive wheel places it on the upper end of the spectrum of aggressiveness among Standard Abrasivesâ„¢ Unitized Wheels. Given the coarseness of the mineral and the greater density, this wheel is able to withstand high-pressure applications and cut aggressively, making it well-suited for deburring and polishing applications on smaller areas of the workpiece.

Use our Standard Abrasivesâ„¢ Quick Change Unitized Wheel, A/O 800 Series to deburr stainless steel pipe thread, wire edges from surgical instruments, stainless steel sinks, tanks and other equipment for the food service industry. It is a prime choice for deburring gears and aircraft wing spars, and breaking edges on aluminum extrusions. When it comes to polishing, trust the Quick Change Unitized Wheel, A/O 800 Series to effectively polish stainless steel rule dies, welds on stainless steel sinks, machined surfaces, hand tools and round tubing.

Quick Change Wheels are Easy to Use
Standard Abrasivesâ„¢ Quick Change Unitized Wheels are available in smaller sizes with a TS or TR attachment. Quick change wheels allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications. Easy fastening and swapping of wheels enhances tool efficiency and worker productivity. Unitized wheels are bi-direction and can be mounted to the tool without regard to the direction of the spindle rotation.

Choose the disc compatible with your TR or TS holder pad. TR wheels have a nylon threaded male hub that easily threads onto TR or 3Mâ„¢ Rolocâ„¢ type holder pads with a turn of the wrist, and the TS system has a metal hub that fastens to its holder pad with a simple twist.

All Standard Abrasivesâ„¢ TS and TR holder pads have a 1/4-20 female thread. A 1/4" TA4 mandrel attaches the holder pad to the tool (sold separately, part number 540013).

Non-Woven Unitized Construction Offers a Step Up in Density and Durability for Stubborn Surfaces
Standard Abrasivesâ„¢ Quick Change Unitized Wheels, A/O 800 Series are a great match for tough deburring, cleaning, blending and finishing applications. They come in a broad range of densities and grades to suit different metals, the degree of aggressiveness required, shape of the part, and desired finish. Although used for some of the same tasks as Standard Abrasivesâ„¢ Buff and Blend products, they are designed with a far stronger and denser construction to support more aggressive applications and accomplish material removal more rapidly. Even though unitized wheels are much stiffer products, the non-woven nylon fibers of the wheel maintain the advantage of responding to surface irregularities while preserving the geometry of the piece, and produce a consistent finish.

Unitized wheels are created by starting with layers of open web material that combines non-woven fiber strands and abrasive mineral with a tough resin bond. These layers of web are then cured and compressed together. By fusing layers of open web, the abrasive gains more toughness and durability, so it can withstand repeated wear.

Ultimately, the wheel's durability is what makes it such a good match for edges. Regardless of the diameter or thickness of the wheel, it maintains its structural integrity to remain a stiff and long-lasting abrasive even under high pressure. Additionally, as the layers wear, the wheel can be dressed to maintain its shape.

Load-Resistance Boosts Life and Performance
Standard Abrasivesâ„¢ Unitized Wheels are load-resistant to keep you cutting with fresh mineral. The gaps in the open web allow unwanted swarf to escape. Consequently, less debris clogs the abrasive, so the mineral can stay fresh, keep cutting sharp and deliver a consistent cut over the life of the product. As the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface, contributing to cleaner surfaces and less re-work. Furthermore, manual fatigue that may result from applying heavy pressure to a dull abrasive is reduced.

The Many Benefits of Standard Abrasivesâ„¢ Non-Woven Products
Standard Abrasivesâ„¢ Unitized Wheels offer many benefits for heavy-duty jobs. For all the aforementioned reasons, Standard Abrasivesâ„¢ Unitized Wheels invigorate deburring, cleaning, blending and finishing applications by helping operators reduce finishing steps, minimize costs and achieve greater throughput.

Standard Abrasives Quick Change TR A/O Unitized Wheel 882198, 821 3 in x 1/4 in

Specifications
General Information
Brand
Standard Abrasivesâ„¢
Attachment Type
TR
Country Of Origin
United States
Sold As
Case
Lead Time
2 days
California Residents
Dimensions and Specifications
Center Hole Diameter (Imperial)
0.25 in
Center Hole Diameter (Metric)
6.35 mm
Face Width (Imperial)
0.25 in
Face Width (Metric)
6.35 mm
Maximum Speed
12000 rpm
Overall Diameter (Imperial)
3 in
Overall Diameter (Metric)
76.2 mm
Grit
Non Pertinent
Width
0.12 yd
0.11 m
Height
0.11 yd
0.1 m
Length
0.2 yd
0.18 m
Volume
114.1 cubic inch
1869.84 cm3
Weight
23.36 oz
662.2 g
Other Details
Density
8
Material and Composition
Abrasive Material
Aluminum Oxide
Grade
Medium
Product Form
Wheel
Certifications and Standards
Density Rating
Hard
Why would you use this tool for ?
Reviews