3M Adhesion Promoter 4298, Sponge Applicator Packet, 2.5 cc
3M Adhesion Promoter 4298, Sponge Applicator Packet, 2.5 cc
3M Adhesion Promoter 4298, Sponge Applicator Packet, 2.5 cc

3M Adhesion Promoter 4298, Sponge Applicator Packet, 2.5 cc

Regular price
/

$1,100.99 USD & FREE Shipping.
  • Ideal for prepping substrate surface for effective bonding of attachment tape to automotive parts
  • Suitable for use on PPO, PC and other LSE substrates in automotive applications
  • Dries in 30 - 90 seconds
  • Easy to apply directly from sponge applicator packet
  • Formulated for use with 3Mâ„¢ Acrylic Foam Tapes and 3Mâ„¢ Acrylic Plus Tapes
Overview
3M Adhesion Promoter 4298 is a versatile liquid primer specifically formulated for enhancing the adhesion of 3M Acrylic Foam Tapes to low surface energy substrates common on interior and exterior automotive trim and parts. This fast-drying adhesion promoter works with most LSE plastics including PPO, PP, PC, PC + ABS and others.

Versatile Adhesion Promoter for LSE Plastics
Formulated specifically for use with 3M™ Acrylic Foam Tapes, our 3M™ Adhesion Promoter 4298 promotes a permanent bond with a wide range of low surface energy plastics and other materials commonly used in automotive OEM. It works well with PPO, polypropylene (PP) as well as polycarbonate (PC) and PC + ABS. It dries in 30 to 90 seconds for fast and efficient application. Once it’s dry, it’s ready to accept attachment tape. The adhesion promoter can also be cleaned from most surfaces using acetone solvent. The 3M™ Adhesion Promoter 4298 is specifically formulated to be used with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes.

Easy to Apply and Use
3M™ Adhesion Promoter 4298 is supplied in an easy-to-use sponge applicator packet. This packet tears open easily across the top to expose the sponge applicator, and the bottom section of the packet is excellent for no-mess application. The adhesion promoter can also be applied using a gravity feed wipe, knurled roller, sprayer, or a felt-tipped or similar applicator.  3M™ Adhesion Promoter 4298 can be cleaned up with methylethyl ketone (MEK) or acetone solvents (be careful with solvents on plastics).

Recommended Applications

  • ‎ LSE plastic trim and parts
  • Automotive dash and interior trim
  • Injection-molded side body side moldings
  • Automotive claddings
  • For use with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes

Better Science for Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations - and all of it goes into each of our products for automotive OEMs and Tier Suppliers, like 3M™ Adhesion Promoter 4298.

3M Adhesion Promoter 4298, Sponge Applicator Packet, 2.5 cc

Specifications
General Information
Brand
3Mâ„¢
Product Type
Accessory
Surface Type
Plastic
Adhesive Type
Non Pertinent
Country Of Origin
United States
Sold As
Case
Lead Time
2 days
California Residents
Dimensions and Specifications
Volume (Imperial)
0.08 fl oz
Volume (Metric)
2.5 cm³
Volume Imperial
0.08
Volume Metric
2.5
Width
0.32 yd
0.29 m
Height
0.17 yd
0.16 m
Length
0.37 yd
0.34 m
Volume
944.17 cubic inch
15472.19 cm3
Weight
64 oz
1814.3 g
Usage Information
Application
Promoting adhesion of tape when attaching badges
Material and Composition
Composition
Non Pertinent
Shelf Life
730
Color and Appearance
Product Color
Yellow
Certifications and Standards
Factory ISO Certification
No ISO Certification information available
Why would you use this tool for ?
Reviews