Stahlwille 98830195 Assortment tools with workbench

Stahlwille

267

11 hex socket wrench bits, 1/4” no. 40: 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm
17 hex socket wrench bits, 1/2” no. 52: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm
2 extensions, 1/4” no. 405QR: 54; 150 mm
1 QuickRelease ratchet No. 415QR N: 1/4”
1 bit connection part no. 3116
2 extensions, 1/2” no. 509QR: 130; 255 mm
1 QuickRelease ratchet no. 512QR N: 1/2”
1 transition piece no. 410: 1/4 to 1/2”
1 transition piece no. 513: 1/2 to 3/8”
1 bit holder no. 412: 1/4”
2 bit ratchets no. 4008: 1/4”
1 bit holder no. 4007: 1/4”
1 bit set no. 1206: 1 bit holder | L. 25 mm: SL4;5;6mm (2x) | PH1;2;3 (3x) | PZ1;2;3 (3x) | T10;15;20;25;27;30;40 (2x) | T BO10;15;20;25;27;30;40 | INHEX 3;4;5mm | L.75mm: SL6 mm | PH2;3 | PZ1;2 | T20;25 | 56-piece set
1 pipe wrench no. 6551: 240 mm
1 heavy-duty diagonal cutting pliers no. 6602: 160 mm
1 needle-nose pliersno. 6529: 200 mm
1 combination pliers no. 6501: 180 mm
16 combination spanners no. 13:6; 7; 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm
1 spanner, adjustable no. 4025
5 ratchet combination spanners, flat no. 17F: 8; 10; 13; 17; 19 mm
1 electronic slotted screwdriver no. 4628: 0.4 x 2.5 x 60 mm
2 slot screwdriversNo. 4620: 0.8 x 4 x 100; 1.6 x 10 x 200 mm
3 PHILLIPS® screwdriversno. 4630: PH1; PH2; PH3
1 cable stripping knife no. 12320
1 roller tape measure no. 12935/3: 3 m
1 mini magnet lifter no. 12600: 270 g
1 wooden folding ruler no. 13111: 2 m
1 ball-shaped offset screwdriver setTORX® no. 10771/8: 8-piece set
1 hex ball-shaped offset screwdriver set No. 10767/9: 9-piece set
1 engineer’s hammer no. 10961: 500 g
1 soft-faced hammer no. 10959: 35 mm
1 flat chisel no. 102/175: 175 mm
1 pin punch no. 108/150: 150 x 6 mm
1 centre punch no. 105/100: 100 x 10 mm
1 pin punch no. 109/6: 3.4 mm
1 drift punch no. 104/120: 120 x 4 mm
1 screw extractor set no. 900/6 T: 6-piece set
1 warding file set no. 12800: 6-piece set
1 flat file no. 12036: 260 mm
1 gasket scraper no. 12718
1 general-purpose knife no. 12965
1 wire brush no. 12377
1 steel ruler no. 13110
1 metal saw no. 12050
1 scriber tool no. 12322
1 wire cutter no. 13148
1 precision feeler gauge no. 11095/20
13 combination spanners no. 14: 6; 8; 10; 13; 14; 17; 19; 21; 22; 24; 27; 30; 32 mm
15 open-end wrenches no. 12: 3.2; 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm
1 circlip pliers no. 6546: A21
1 circlip pliers no. 6543: J2
1 circlip pliers no. 6545: A2
1 circlip pliers no. 6544: J21
9 screwdriver inserts TORX® 1/2” no. 54 TX: T20; T25; T27; T30; T40; T45; T50; T55; T60
10 screwdriver inserts for Allen screws, 1/2” no. 54: 4; 5; 6; 7; 8; 10; 12; 14; 17; 19 mm
2 screwdriver inserts for TORX®, 1/2” no. 1054 TX: T30; T50
2 screwdriver inserts for Allen screws, 1/2” no. 1054/2054: 6; 8 mm
4 screwdriver inserts for Allen screws, 1/4” no. 44: 3; 4; 5; 6 mm
8 screwdriver inserts for TORX®, 1/4” no. 44 TX: T8; T10; T15; T20; T25; T27; T30; T40
5 screwdriver inserts for Allen screws, 1/4” no. 44: 3; 4; 5; 6; 8 mm
4 electronic slotted screwdriver no. 4751: 0.3 x 1.5; 0.4 x 2; 0.4 x 2.5; 0.5 x 3 mm
3 electronic PHILLIPS® screwdrivers No. 4752: PH00; PH0; PH1
1 needle-nose pliers no. 6540: 125 mm
1 mini electronics diagonal cutter no.6604
1 slotted screwdriver no. 4620: 1.0 x 5.5 x 125 mm
4 PHILLIPS® screwdriversno. 4640: PZ0; PZ1; PZ2; PZ3
2 PHILLIPS® screwdriversno. 4734: PH1; PH2
1 voltage tester no. 10554

Germany

4018754343362

NCNR - Non-Cancellable / Non-Returnable

98830195

Workbench

500 mm

1,150 mm

1,045 mm

anthracite, RAL 7016

Three-stage safety concept:
1. Central locking with a lateral cylinder lock and hinged key
2. Individual locks prevent inadvertent opening while in transit
3. Tilt protection – makes it impossible to pull out several drawers at the same time
7 drawers
Large work surface with birch multiplex worktop, FSC certified, 1150x 500x30 mm
Separate lockable cabinet with magnetic bracket and adjustable shelves (70mm grid)
Drawers and cabinet section close at the same time
Stainless steel trim
Cabling is possible through two rubberised feed throughs and a removable cable channel on the back
Oil- and acid-resistant wheels (125 mm diameter) with thread guards to protect the bearings from dirt and threads, with two locking brakes
Frame RAL 7016, drawers and cabinet RAL 9005, in durable industrial powder coating
Paper roll holder
Hole pattern on the side for hooks No. 8031-8041, e.g., for larger tools
Can be fitted with STAHLWILLE standard and TCS inserts, drawer 1+2; 1 x 3/3 + 1 x 2/3 drawer 3-7; 1 x 3/3
Optionally available e-kit consisting of a magnetic multi-plug with two USB ports, a magnetic holder (for variable attachment to any part of the workbench), and a cable holder