Standard Abrasives Buff and Blend GP Mounted Flap Brush, 875506, Very
Fine

Standard Abrasives Buff and Blend GP Mounted Flap Brush, 875506, Very Fine

Regular price
/

$1,499.99 USD & FREE Shipping.
  • Moderately aggressive non-woven brush material is ideal for a variety of light to medium-duty industrial tasks
  • Conformable flaps deliver a consistent in-line brush finish for stainless steel and aluminum cookware, leaving no lines on the surface
  • Tear-resistant nylon material tolerates irregular shapes on the part
  • Open web design resists loading and provides a good alternative to wire brushes
  • Resin coated surface runs cool and is waterproof for use with lubricants
  • Steel mandrel shaft offers sturdy tool attachment and quick grade changes
  • Available in medium (MED – maroon) and very fine (VFN – gray) grade aluminum oxide
Overview
Both tough and pliable, the Standard Abrasives Buff and Blend Mounted GP Flap Brush is a good match for light to medium-duty cleaning and deburring applications on contours or uneven surfaces. Multi-purpose GP material leaves a consistent finish on irregular surfaces and suits a variety of metals, including ferrous alloys. The attached mandrel securely fastens to small straight tools with ease.

Moderately Aggressive for Light to Medium-Duty Applications
Our Standard Abrasives™ Buff and Blend GP Mounted Flap Brush is a great multi-purpose product for industrial maintenance applications. Among Buff and Blend materials, GP material is moderately aggressive. Use it to remove light oxidation, blend minor surface imperfections, clean surfaces prior to coatings, remove small burrs, and perform basic equipment cleanup. A flexible open web conforms to workpiece contours, curves and ridges. Its non-woven construction makes the flaps spongy and responsive. When the job requires a tougher product for higher-pressure applications, we recommend using a Standard Abrasives™ Buff and Blend HS Flap Brush.

Using Standard Abrasives™ Buff and Blend discs, wheels and brushes, operators can tackle ridges and contours with less concern about gouging or marring the substrate, thus reducing waste and the need for rework.

Aluminum Oxide Offers Fast Cut
This flap brush is made with aluminum oxide mineral, which cuts sharp but is still friable – fragmenting under heat and pressure to reveal sharp cutting edges. The tan, MED brush delivers a somewhat coarse scratch pattern, suitable for satin or matte finishes, while the gray VFN brush provides a finer finish.

Consistent Finishes, Operator Comfort
Flap brushes produce a consistent finish which does not reflect lines commonly attributed to ganged arbor hole discs. Density, pressure and angle determine the ability of the flap brush to remove burrs, oxidation and handling marks. The abrasive material provides ventilation which helps dissipate heat and, therefore, runs cooler. This provides consistent finishes without smearing or otherwise discoloring the work piece. Minimal vibration can reduce chattermarks on the workpiece and can lead to less operator and machine fatigue.

The permanently affixed 1/4˝ shank enables convenient use on small straight pneumatic and electric grinders, and provides smooth running and ease of control for off-hand operations.

Load-Resistant Construction Boosts Life and Performance
Standard Abrasives™ Buff and Blend products are load-resistant to keep you cutting with fresh mineral. The gaps in the open web allow unwanted swarf to escape. Consequently, less debris clogs the abrasive, so the mineral can stay fresh, keep cutting sharp and deliver a consistent cut over the life of the product. As the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface, contributing to cleaner surfaces and less re-work. Furthermore, manual fatigue that may result from applying heavy pressure to a dull abrasive is reduced.

The Many Benefits of Standard Abrasives™ Buff and Blend Products
Standard Abrasives™ Buff and Blend products invigorate deburring, cleaning, blending and finishing applications by helping operators reduce finishing steps, minimize costs and achieve greater throughput. Each Buff and Blend product and grade offers unique benefits, so operators can choose from a versatile range of options to ensure superior performance on specific applications.

Standard Abrasives Buff and Blend GP Mounted Flap Brush, 875506, Very Fine

Specifications
General Information
Brand
Standard Abrasives™
Attachment Type
Shaft
Country Of Origin
Mexico
Sold As
Case
California Residents
Dimensions and Specifications
Maximum Speed
15000 rpm
Overall Diameter (Imperial)
2 in
Overall Diameter (Metric)
50.8 mm
Overall Width (Imperial)
2 in
Overall Width (Metric)
50.8 mm
Center Hole Thread Size
Non Pertinent
Grit
Non Pertinent
Width
9.62 in
24.45 cm
Height
8.87 in
22.54 cm
Length
23.75 in
60.33 cm
Volume
2028.68 cubic inch
33244.16 cm3
Weight
35.41 lb
16.06 kg
Material and Composition
Abrasive Material
Aluminum Oxide
Grade
Very Fine
Product Form
Brush
Color and Appearance
Product Color
Maroon
Resources
Brochures
Why would you use this tool for ?
Reviews