3M PPS Spray Gun Holder, 16236, Single Gun

3M PPS Spray Gun Holder, 16236, Single Gun

Regular price

$110.99 USD & FREE Shipping.
  • Rack for keeping spray guns used with 3M™ PPS™ Series 2.0 and 3M™ PPS™ (Legacy) easily accessible
  • 3M™ PPS™ is an all-in-one disposable solution for mixing/measuring, filtering, spraying in any direction
  • System enables the painter to consistently spray at 90° to the part (even upside down), improving transfer efficiency and reducing material waste
  • The all-in-one solution reduces the chance of outside contamination and reduces paint consumption
  • PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%
  • System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use
3M PPS Spray Gun Holder works with the 3M PPS Series 2.0 and 3M PPS (Legacy) paint preparation system. Holders are available in single gun, double gun and quad gun designs. 3M PPS is a complete painting system that allows the painter to measure, mix, filter, spray and temporarily store paint materials.

3M™ PPS™ Spray Gun Holder is an accessory for use with the 3M™ PPS™ Series 2.0 and 3M™ PPS™ (Legacy) paint preparation system. Our holder keeps spray guns conveniently accessible and in a safe location while in storage. Keeping spray guns in this holder safeguards them from potential damage that can occur from laying them on a table or the floor. Choose from holders designed to store one, two or four spray guns.

Advantages of the 3M™ PPS™System
Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.

Your Spray Gun Functions at any Angle, Even Upside Down
PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees.

Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.

A Versatile System that Works with Most Spray Guns
Specifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. 

The Bottom Line: Why 3M is the Paint & Coatings Spray System of Choice
3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.

3M PPS Spray Gun Holder, 16236, Single Gun

General Information
Country Of Origin
Sold As
California Residents
Dimensions and Specifications
372.71 cubic inch
6107.71 cm3
41.5 oz
1176.44 g
Usage Information
Paint Application
Sub Applications
Color and Appearance
Holder Design
Single Gun
Packaging and Shipping
Case Quantity
5.0 per Case
Why would you use this tool for ?