Features
Klein Tools Non-Contact Voltage Tester detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires. A bright green LED indicates the tester is powered on. It changes to red and an audible tone sounds when voltage is detected.Klein Tools Outlet Repair Kit with Voltage Tester, Wire Stripper, and Stubby Multi-bit Screwdriver, 3 Pc.
- Tool Sets
- Klein Tools
- M2O08721KIT
K11095 Klein-Kurve Wire Stripper / Cutter, 8-20 AWG
32308 8-in-1 Multi-Bit Adjustable Length Stubby Screwdriver
K11095: Steel
32308: Stainless Steel Barrel & Plastic
Drop Protection: 6.6' (2 m)
Voltage: 50 - 1000V AC
Frequency: 50 - 500 Hz
Pollution Degree: 2
Standard: CAT IV 1000V
Batteries: 2 x AAA (Included)
K11095:
Insulated: No
Strips and Cuts: 8-18 AWG Solid, 10-20 AWG Stranded
Screw Shearing: 6-32, 8-32
Wire Gauge: 8-18 AWG Solid, 10-20 AWG Stranded
Hold-Open Spring: Yes
Handle Finish: Comfort Grip
32308:
Nut Driver Sizes: 1/4"
Phillips Bits: #1, #2, #3
Slotted Bits: 3/16'' (4.8 mm), 1/4'' (6.4 mm)
Square Bits: #1, #2
Bit Retention: Magnetic
Insulated: No
Handle Type: Cushion Grip
Handle Length: 2.5'' (6.4 cm)
Voltage Tester provides non-contact detection of voltage in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires
Volt Pen with high intensity, bright green LED indicates the tester is powered on
When voltage is detected, a high intensity, bright red LED illuminates and an audible tone will sound
50 to 1000 VAC power operating range allows broad application
Auto power-off feature conserves and extends battery life
CAT IV 1000V safety rating
Lightweight compact design with a convenient clip to fit securely in your pocket
Product not recommended for testing tamper-resistant outlets; use Cat. Nos. NCVT-2P or NCVT-3P in low voltage mode
Includes instructions and 2 x AAA 1.5 volt batteries
6.6-Foot (2 m) drop protection
K11095:
Wire Stripper with six precision ground stripping holes for 8-18 AWG Solid and 10-20 AWG Stranded wire
Narrower head geometry gets into hard to reach places
Screw shearing holes for 6-32 and 8-32 bolts and precision, shear-like blades that provide clean cuts
Dual wire looping holes
Made in USA
Updated lock tucks out of the way
Coil spring provides fast self-opening action
Klein-Kurve™ comfort grip handles with extended tool coverage
32308:
Multi-bit stubby screwdriver includes 7 different screwdriver bits and a 1/4-Inch nut driver
Compact driver reaches easily into tight spots
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful Rare-Earth magnets for securing bits and fasteners
Cushion-Grip™ handle for maximum comfort
Klein Tools is the result of one of those “happy accidents” that turn out to be revolutionary. Klein Tools famously got their start in 1857 when a linesman came to founder Matthias Klein to repair his broken pliers. Klein replaced the broken half and when the old half of the tool broke too, Klein forged a replacement for that, thus making the first Klein Linesman pliers. Since these humble beginnings, Klein Tools has grown and become one of the largest American made toolmakers and they’re a brand used by tradesmen, linesman and electricians all across America.